The wireless network card and antenna are integrated into
the ProTouch IPC.
To be able to get an RF connection for the noax IPCs within
an access point's RF cell you need a Wireless Network Card.
This Wireless Network Card is mounted inside the noax IPC.
The antenna is at the top of the noax terminal.
The wireless network card connects the noax terminal
wireless into local networks (LANs) and guarantees superior
coverage and high data rates. A standard PCI board with noax
terminal antenna or external antenna replaces a traditional
LAN adapter. This RF LAN adapter powered by the noax ipc
needs the access point base station. This makes the noax
terminal mobile.
-
Data rates 11 Mbit/s, ideal for high data rate applications
-
IEEE 802.11b compatible
-
For PCI architecture (PCI 2.x compliant)
-
Diversity-antenna or external antennas with higher gain
(optional extra)
-
Frequency range 2,4 GHz (ISM)
-
Supports all known operating systems including Windows
98/ME/NT/2000/XP
-
Automatic switching to lower data rates at border areas
increases the range of the RF cells
|
Part no.
|
Part
|
|
11944
|
WLAN Set ARtem for N6/N8; IEEE802.11g (WiFi)
|
|
12148
|
WLAN Set ARtem for N7; IEEE 802.11g (WiFi)
|
|
11947
|
WLAN Set Cisco for N6/N8; IEEE802.11b (WiFi)
|
|
12257
|
WLAN Set Cisco for N7; IEEE 802.11b (WiFi)
|
|
11966
|
WLAN Set Symbol for N6/N8; IEEE802.11b (WiFi)
|
|
11982
|
WLAN Set Symbol for N7; IEEE 802.11b (WiFi)
|
|
11654
|
PCI adapter card for PCMCIA WLAN module
|
A wide range of software drivers allows a broad range of
applications. With this a mobile noax terminal can be a
fully integrated part of a local network.
